AppLovin MAX
Last updated
Last updated
The MAX legacy HyprMX adapter will be sunset on July 16, 2025. To avoid disruptions and ensure your monetization continues smoothly, please migrate to the custom adapter by following the steps below.
This guide walks you through setting up the HyprMX Android SDK as a custom ad network in AppLovin MAX mediation. See below for instructions on how to set up a new adapter or upgrade to newer versions.
Rewarded Ads
Interstitial Ads
Banner/MREC
HyprMX-MAX Adapter Version: 6.4.2.0
Compatible with AppLovin SDK: 12.4.2+
If you need support for older AppLovin versions, your HyprMX account manager is here to help.
Click "Click here to add a Custom Network" at the bottom of the page. The "Create Custom Network" page appears.
Enter the following details about the custom network:
Network Type: SDK
Custom Network Name: HyprMX
iOS Adapter Class Name: HyprMXAdapter
Keep this blank if you're only integrating with Android
Android Adapter Class Name: com.hyprmx.android.HyprMXMaxAdapter
Press Save to create the SDK network.
💡Migrating from the MAX Legacy Adapter?
If you’ve previously set up HyprMX ad units using the legacy adapter, you’ll need to create new placements for the custom adapter.
To set up:
Click the ad unit where you want to enable HyprMX.
Scroll down to the Custom Networks section and enable HyprMX.
Enter relevant information for each placement.
💡Migrating from the MAX Legacy Adapter?
To keep your reporting clean and seamless:
Use the same Distributor ID(s) you've been using with your current setup
Use the same Placement Name(s) as your current setup
App ID: Your Distributor ID (from your account manager)
Placement ID: Your Placement Name (from your account manager)
CPM Price: Desired floor price
If you're migrating from the legacy adapter, disable the legacy adapter under the Other Networks section.
Important: Avoid Adapter Conflicts
To ensure smooth monetization and prevent issues, only one HyprMX adapter (legacy or custom) should be active at a time.
Save and repeat these steps for each Ad Unit you'd like to configure.
💡Migrating from the MAX Legacy Adapter?
If you’re not yet ready to go live with the custom adapter:
Temporarily disable the HyprMX custom adapter before clicking Save.
This lets you save any configuration changes and come back later to complete the setup.
If you’ve already completed Step 5, remember to re-enable the legacy adapter to avoid disrupting monetization.
When you're ready to go live with the custom adapter:
Disable the legacy adapter, enable the custom one, and then Save.
Having both adapters enabled at the same time can cause delivery conflicts and impact revenue.
Follow these steps to install the HyprMX custom adapter:
Open your existing application in Android Studio.
If you're migrating from the legacy adapter, remove the following dependency from your app's build.gradle
file:
Add or update the following dependency to your app's build.gradle
file:
You can receive test ads by enabling test mode. When using the custom adapter, enable test mode before initializing MAX:
We recommend putting HyprMX at the top of your waterfall during testing to ensure you receive ad requests.
Once the SDK is initialized, request an ad and confirm you see test ads. That’s it — you're integrated!
If you have any questions, your HyprMX account manager is just a message away!
In the MAX Dashboard, go to: .
Open in the MAX dashboard.
This guide assumes you already have the AppLovin Android SDK integrated into your project. If not, refer to the before proceeding.
By integrating the HyprMX SDK, you are agreeing to the .